How to Paint Kitchen Cabinets

A new coat of paint will create worn, tired room cupboards look new once more. Thorough preparation is that the key to with success painting room cupboards.

Size-Up the task

Wood, wood-laminate, and metal cupboards typically is repainted easily. laminate cupboards resist overpainting — people who typically|will be|is|may be} refinished often need special paints and techniques, and results will vary. If your cupboards have laminate surfaces, 1st talk over with a knowledgeable paint dealer, and take a look at a sample of the paint you would like to use in an not noticeable space to confirm that it’ll bond to the fabric.

Flat-front doors and drawers ar simply repainted, however woodwork with raised panels, routed profiles or different subject field particularisation would force longer to preparation and paint. If the woodwork is crooked, badly worn or broken, or returning apart at the pasted joints, you’ll value more highly to get new unfinished doors and drawers and paint them along side your existing cupboards.

Applicator choices for repainting embody spraying, rolling or brushing with either a natural or artificial brush or a foam brush. All have their benefits and disadvantages; select whichever is most suited to the number of woodwork to be repainted and your own form of operating. the most effective device additionally might depend upon the sort of paint or end you select.

take away Doors and Hardware

Watch video of this step.

Start by removing the cupboard doors and drawers and take away all pulls, knobs, latches and different hardware from these elements. Place the hardware and screws in plastic luggage within the cupboards wherever they’re going to be straightforward to find once you are able to tack everything (Image 1).

Number every door and its corresponding location as you take away them (Image 2). don’t combine them up or the hinges might not line up properly after you install them (Image 3). If you’re painting solely the drawer fronts, you won’t have to be compelled to take away the connected slides. If you are doing ought to take away the slides, mark them and their locations furthermore.

Clean Surfaces

Watch video of this step.

Kitchens ar work areas, so grease, steam, and food splatters ar common. Before you start sanding or painting, clean all of the surfaces to be repainted with an answer made up of one half tri-sodium phosphate and 4 elements water. Rinse, however don’t soak the cupboards. enable them to dry totally.

Sand

Lightly sand the doors on all sides and faces (Image 1). Use a wood sanding block to forestall miscalculation over the wood edges (Image 2). If your repainting project is simply a facelift for the cupboards, you don’t ought to sand and paint the within of cupboard|the cupboard}s; mask off the interiors with painters’ tape for a clean end and sand solely the front surfaces and visual edges of the cabinet face frames.

When sanding, there’s no ought to take away all of the previous paint if it’s sound and well-adhered; simply change surface the surface to produce the new paint with a firm, clean base for higher adhesion. Pay explicit attention to particularly worn areas of previous end, which usually get the foremost use. even be bound to sand over shiny areas to deglaze any remaining previous end. Stubborn finishes might need rubbing with fermentation alcohol and fine wire wool.

If the previous paint is flaking off in places, it indicates the end didn’t adhere well to the wood surface. this can be generally because of wetness or greasy residue obtaining below the paint layer or into the wood itself, which may be expected in kitchens. Sand these areas to reveal wood and spot-prime with a stain-killing primer/sealer before repainting. where you sand all the way down to blank wood, attempt to mix or “feather” the perimeters wherever the previous paint meets the wood therefore the new paint can lay flat, and therefore the paint edges won’t be visible or “telegraph” through the new end.

Leave a Reply

Your email address will not be published. Required fields are marked *